Hammer drills are rotary drills that provide a short, rapid hammer action. When equipped with a masonry bit, hammer drills can be used to drill into concrete, brick, mortar, or concrete.
Personal Protective Equipment
Be sure to wear the appropriate safety gear to protect yourself when operating a hammer drill. PPE should include:
- Eye protection (to prevent flying objects from entering the eye)
- Head protection
- Foot protection
Other Apparel Considerations
- Keep long hair away from the tool area to avoid getting it caught in rotating parts
- Do not wear loose fitting clothes or jewellery when operating a hammer drill
Tool Maintenance
Keep your hammer drill operating properly and safely by performing regular maintenance after use.
- Keep your drill clean of debris after use
- Lubricate the chuck, as required
- Prior to each use, check the tool for damaged or defective parts. Never use a damaged or defective tool
- Replace the brush as required
Tool Use Considerations
- Be mindful of the drill bit post use; it can become hot with use
- Ensure good footing when operating a hammer drill
- Know your work area; never drill somewhere where there may be pipes or cables
- Choose the appropriate accessory for the application at hand
Drilling Tips
- Use a side handle, if one is available
- Do not force the tool
- Reduce pressure (to allow the bit to pass through the hole with ease) as you get close to breaking through the work piece
Comments are closed.